+86 13962216508 
E-mail: jesse@fillex-packer.com
Address: B3 Shuangqiao Industrial Zone, Leyu Town, Zhangjiagang, Jiangsu, China
Description of the machine 1) The original juice is purified and sterilized after being passed through a water treatment system, and stored in a purified water storage tank; 2) The juice will be prepared by the juice preparation system, and the prepared juice is temporarily stored in the heat...
1) The original juice is purified and sterilized after being passed through a water treatment system, and stored in a purified water storage tank;
2) The juice will be prepared by the juice preparation system, and the prepared juice is temporarily stored in the heat preservation tank (for heat preservation);
3) The automatic heat-resistant PET bottle blowing machine is connected to the water injection machine through an air conveyor;
4) The prepared juice will be poured into the juice filling machine; at the same time, the empty bottle will be rinsed, filled and capped in a three-in-one module, and the bottle will be washed, filled and capped.
5) The bottled water is transferred from the water injection machine to the bottle and turned over to the disinfection machine. After the bottle cap and the bottle mouth are disinfected by the disinfection machine, the bottle is transferred to the bottle cooler;
6) The bottle is dried after passing through the hair dryer, and the dried bottle is sent to the labeling machine and the PE film shrink packaging machine;
7) The packaged bottled water will flow out of the PE film shrink packaging machine.
Technical Parameters of machine
Model(RFC-H) | 14-12-5 | 16-16-5 | 24-24-8 | 32-32-8 | 40-40-10 | 50-50-12 | 60-60-15 |
Capacity(BPH) | 4000 | 8000 | 10000 | 12000 | 15000 | 18000 | 20000 |
Suitable to Bottle Shape | Round and Square container Bottle diameter: 50-120mm Bottle Height: 160-320mm | ||||||
Drive Motor(KW) | 2.42 | 3.12 | 3.92 | 3.92 | 5.87 | 7.87 | 11.37 |
Rinsing water Pump Power(KW) | 0.37 | 0.37 | 0.37 | 0.37 | 0.37 | 0.37 | 0.37 |
Dimension(L*W*H)mm | 2360*1770*2700 | 2760*2060*2700 | 2800*2230*2700 | 3550*3650*2700 | 4700*3320*2700 | 5900*4150*2700 | 5770*5290*2700 |
Advantages of our machine
1) Completely fill to avoid liquid sinking after liquid cooling and to minimize dissolved oxygen.
2) Reasonable structured storage hopper and material supply system allow the material to flow at a constant flow rate, constant pressure, without foaming, and usually use a high fuel tank.
3) The storage hopper has the characteristics of gas discharge, full sealing and temperature detection. In the medium and high speed production line, the material dispenser replaces the large liquid tank to achieve a complete CIP.
4) The sanitary filling head system adopts an umbrella structure and the filling speed is fast.
5) Complete filling temperature control system.
6) The reflux tank system has the function of automatic feeding.
7) Perfect CIP system.
